Your shopping cart is empty!
The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
Important changes
No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.
General
| Details | |
|---|---|
| Product code | CCR1009-7G-1C-1S+PC |
| CPU | TLR4-00980CH-10CE-A3b |
| CPU core count | 9 |
| CPU nominal frequency | 1 GHz |
| CPU Threads count | 9 |
| Dimensions | 272x190x47mm |
| License level | 6 |
| Operating System | RouterOS |
| Size of RAM | 2 GB |
| Storage size | 128 MB |
| Storage type | NAND |
| Tested ambient temperature | -20C .. +60C |
| Suggested price | $495.00 |
Powering
| Details | |
|---|---|
| Max Power consumption | 33W |
| Number of DC inputs | 2 (PoE-IN, DC jack) |
| PoE in | Passive PoE |
| DC jack input Voltage | 18-57 V |
| PoE in input Voltage | 18-57 V |
Ethernet
| Details | |
|---|---|
| 10/100/1000 Ethernet ports | 7 |
| Ethernet Combo ports | 1 |
Fiber
| Details | |
|---|---|
| SFP+ ports | 1 |
Peripherals
| Details | |
|---|---|
| Number of SIM slots | 1 |
| Number of USB ports | 1 |
| Serial port | RS232 |
| USB Power Reset | Yes |
| USB slot type | microUSB type AB |
Other
| Details | |
|---|---|
| CPU temperature monitor | Yes |
| Current Monitor | Yes |
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Ethernet test results
| CCR1009-7G-1C-1S+PC | Tile 9 core all port test 1GHz with combo-port and SFP+ | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 1,300.4 | 15,792.1 | 3,759.4 | 15,398.5 | 14,874.0 | 7,615.5 |
| Bridging | 25 bridge filter rules | 1,100.4 | 13,363.3 | 1,183.8 | 4,848.8 | 1,184.0 | 606.2 |
| Routing | none (fast path) | 1,300.4 | 15,792.1 | 3,759.4 | 15,398.5 | 14,581.0 | 7,465.5 |
| Routing | 25 simple queues | 1,300.4 | 15,792.1 | 1,686.0 | 7,175.6 | 1,699.6 | 1,142.1 |
| Routing | 25 ip filter rules | 615.8 | 7,478.3 | 660.9 | 2,812.8 | 668.3 | 449.1 |
IPsec test results
| CCR1009-7G-1C-1S+PC | CCR1009 series 1 GHz IPsec throughput | ||||||
| Mode | Configuration | 1400 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Single tunnel | AES-128-CBC + SHA1 | 112.5 | 1260.0 | 112.6 | 461.2 | 115.4 | 59.1 |
| 256 tunnels | AES-128-CBC + SHA1 | 232.1 | 2599.5 | 268.2 | 1098.5 | 277.3 | 142.0 |
| 256 tunnels | AES-128-CBC + SHA256 | 232.1 | 2599.5 | 268.2 | 1098.5 | 277.3 | 142.0 |
| 256 tunnels | AES-256-CBC + SHA1 | 230.0 | 2576.0 | 265.4 | 1087.1 | 260.7 | 133.5 |
| 256 tunnels | AES-256-CBC + SHA256 | 230.0 | 2576.0 | 265.4 | 1087.1 | 260.7 | 133.5 |